BBDMG - HYDRO-SEAL,HEAVY DUTY COLD PART CLNR,HS-3K
- MSDS: BBDMG
- Manufacturer: RADIATOR SPECIALTY CO
- Product Name: HYDRO-SEAL,HEAVY DUTY COLD PART CLNR,HS-3K
- National Stock Number: 5970-00D000878
Product Identification
Product ID:HYDRO-SEAL,HEAVY DUTY COLD PART CLNR,HS-3K
MSDS Date:01/01/1987
FSC:5970
NIIN:00D000878
MSDS Number: BBDMG
Responsible Party
CHARLOTTE, NC 28208
Emergency Phone: 704-377-6555
Info Phone: 704-377-6555
Cage: 77628
Contractor
Telephone: 704-377-6555/303-623-5716
Cage: 77628
Ingredients
POTASSIUM HYDROXIDE (SARA III)
CAS: 1310-58-3
RTECS: TT2100000
Fraction By Weight: 1.2%
OSHA PEL C, 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENOL
CAS: 108-95-2
RTECS: SJ3325000
Fraction By Weight: 3.4%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 8990
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CRESOL, ALL ISOMERS (CRESYLIC ACID) (SARA III)
CAS: 1319-77-3
RTECS: GO5950000
Fraction By Weight: 13.3%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PERCHLOROETHYLENE (TETRACHLOROETHYLENE) (SARA III)
CAS: 127-18-4
RTECS: KX3850000
Fraction By Weight: 8.1%
OSHA PEL 100 PPM
ACGIH TLV: 25PPM/100,A3 STEL;94
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 34.6%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:SEVERE IRRITANT TO
EYES.SKIN:DIZZINESS,NARCOSIS.CORROSIVE TO MOUTH,THROAT,DIGESTIVE
SYS.MAYBE FATAL.
First Aid
First Aid:EYE:CONSULT PHYSICIAN IMMEDAITELY;SKIN:WASH WITH SOAP &
WATER.IN CASE OF SKIN BURNS,CONSULT PHYSICIAN;INH:REMOVE TO FRESH
AIR;ING:DO NOT INDUCE VOMITING,CONSULT PHYSICIAN IMMEDIATELY.
Fire Fighting
Extinguishing Media:NONE
Fire Fighting Procedures:WEAR CHEMICAL PROTECTIVE SUIT WITH SELF CONTD
BRTHG APP.
Unusual Fire/Explosion Hazard:PHENOLIC & CHLORINATED FUMES.
Accidental Release
Spill Release Procedures:OBSERVING HEALTH HAZARDS.VENTILATE AREA.WEAR
PROTECTIVE GEAR.CONFINE SPILL & SOAK UP WITH ABSORBENT
CLAY.TRANSFER TO WASTE DRUM WITH CLOSURE.
Handling
Handling and Storage Precautions:STORE IN COOL PLACE.KEEP AWAY FROM
CHILDREN.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED,WEAR RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE.
Ventilation:ADEQUATE VENTILATION & LOCAL EXHAUST.
Protective Gloves:SOLVENT-RESIST.
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:APRON.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:100F/38C
Spec Gravity:1.17
Solubility in Water:EMULSIFIABL
Appearance and Odor:DARK AMBER LIQ W/25% FLOATING WATER SEAL.PHENOL OD
Percent Volatiles by Volume:72
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT USE IN CONFINED AREAS WITHOUT
VENTILATION.
Hazardous Decomposition Products:IN CONTACT HOT METAL SURFACE: HYDROGEN
CHLORIDE,PHOSGENE.
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.